RESTORE | Rust Converter & Protective Coating

RESTORE is a rust converter and protective coating that performs two operations at one time. First, rust is
 converted from iron oxide to ferrous oxide, a black organic complex. Then, a clear acrylic coating is formed.
The surface can be left as is or painted over using latex or oil-based paint. The coating formed by the
 product is sufficient to last for years without painting. Can virtually be used on all rusted surfaces. Apply this 
ready-to-use product with a brush or swab. The temperature range is 0°F to 250°F for the finished film.

 

Additional sizes available: 6-gallon case (5415-06C)

 

request quote button

 

Have a question? Call us at (504) 888-8989

 

Use RESTORE in industrial plants, refineries, chemical plants, machine shops, oil-fields, shipyards, military,
 schools, etc.

Clean rusted surface of loose flakes with a wire brush. Apply product at a rate of 300 to 500 sq. ft. per gallon.
Apply by brushing, dipping, swabbing, or spraying product evenly over the rusted surface. May be applied
 using equipment designed to spray latex paint. If necessary, when spraying add up to 3 oz. water per gallon.
 Allow drying completely. A clear hard finish will form. The surface may be painted or left as is after drying. Do not
 store at or below 32° F.

Appearance…………………… Viscous creme colored liquid


Odor…………………………….. Mild


pH……………………………….. 3.0


Specific Gravity………………. 1.0


Toxicity………………………….. Non-Hazardous


Wetting Ability……………….. Saturates


Evaporation rate…………….. Slow


Solubility in Water…………… 100%


Cold Stability………………….. Excellent – 35° F


Phosphates…………………….. None


Storage Stability………………. Excellent, 1 year +


Biodegradable…………………. No

Causes eye irritation. Wash hands thoroughly after handling. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical attention.

Have a question? Call us at (504) 888-8989