Vital Oxide | Disinfectant Sanitizer

For Use Against Sars-CoV-2 (Covid-19)

VitalOxide is a one part, stable, Chlorine Dioxide disinfectant sanitizer that is an EPA registered mold killer and super effective odor eliminator. Ready to use with no mixing required, just spray, wipe or fog right from the bottle. Non Rinsing, Non-irritating to the skin, and non-corrosive to treated articles.

It is effective in inhibiting mold and mildew from growing for up to 4 weeks, and eliminates malodors due to smoke, trash, septic systems, stale cooking and more, without using masking agents. It contains no volatile organic compounds (VOCs) and kills a wide range of viruses, such as novovirus, and feline and canine coronaviruses. With its NSF listed D2 classification, Vital Oxide® kills 99.999% of bacteria, including E. coli, salmonella, and Listeria in less than 60 seconds. It is odorless, requires no rinse, and does not alter the taste of food that has been prepared on sanitized surfaces.

It is safe to use on pet bedding and sleeping areas and is a proven allergen eliminator, effective on pet dander, dust mites, and cockroach allergens. It also leaves HVAC systems and air ducts free of microbial contamination from bacteria, mold, mildew and other fungi, while ensuring air quality.

For commercial, hospitals, and institutional users, this 55-gallon drum of Vital Oxide and is great for refilling product sprayers, sanitization dilutions, mold remediation, covering large surfaces and areas.

request quote button

 

Have a question? Call us at (504) 888-8989

 

Not all disinfectants and mold removers are created equal. Vital Oxide uses a unique chemical compound called chlorine dioxide. Chlorine dioxide has been used during Anthrax attacks, in the aftermath of Hurricane Katrina, to purify drinking water, and most recently to kill MRSA in schools and hospitals. While other competitors and manufacturers have attempted to copy and produce a form of stabilized chlorine dioxide similar to Vital Oxide, our revolutionary formula is simply unequaled.

Also consider carefully what kinds of chemicals you want around your children, employees, patients, students, friends, and family members. When evaluating and comparing disinfectant products, take a close look at their core ingredients. Most disinfectants and mold removers on the market are extremely toxic and leave behind harmful byproducts and nauseous fumes.

With Vital Oxide, however, you no longer need to use bleach and other harsh chemicals that increase volatile organic compounds (VOCs) in your environment. You can have the peace of mind that you are using a disinfectant that won’t irritate your skin and doesn’t come with any alarming safety warnings and precautions, while still effectively eliminating pathogens and allergens in your home and workspace.

Stable Chlorine Dioxide Formula

Full strength and ready to use

EPA-registered hospital disinfectant with lowest toxicity category—gentle enough for daily disinfecting and sanitizing

NSF-registered “no-rinse on food-contact surfaces” sanitizer (D2)

Certified by CRI (Carpet & Rug Institute) for pet stains and odor

OSHA / WHMIS / GMS compliant

Effective fungicide

Effective mildew and mold remover—kills mold spores and prevents mold regrowth on tile and other materials up to seven months

Excellent for water damage and mold removal services

Heavy-duty odor eliminator—gets rid of bad odors by attacking the source of the problem, not by masking

Eliminates allergens in homes and other environments

Eliminates mold, mildew, and odor in HVAC systems and air ducts

Sanitizes 99.999% of food contact surfaces with no-rinse required

Carpet and rug sanitizer

Soft-surface sanitizer

Hypo-allergenic

pH balance of ~8.5

No volatile organic compounds (VOCs)

No harsh chemicals, non-irritating to skin, no nauseous fumes

No personal protection equipment needed

Effective disinfectant that kills 99.999% of bacteria and viruses, including H1N1; MRSA; Norovirus; HIV; Legionella; Pseudomonas aeruginosa; Hepatitis A, B, and C; Ebola virus; and more

Appearance:Colorless liquid

Odor:MildFresh

Physical State:Liquid

pH:89

Boiling Point (°F):212

Solubility in Water:100%

Freezing Point (°F):32

Vapor Pressure(mm Hg):Not Available

Volatile Organic Compounds (VOC):None

Evaporation Rate:Less than Ether

Specific Gravity:1.003@ 68°F (20°C)

Density (lb/gal):8.40@ 68°F (20°C)

 

ENVIRONMENTAL PROTECTION AGENCY

  • Lowest EPA Toxicity Category IV
  • No gloves or protective equipment required
  • No ocular irritation
  • No dermal irritation
  • No acute inhalation

EPA Registration for MRSA

 

NSF INTERNATIONAL

  • No rinse required on food-contact surfaces

NSF Registration for No Rinse No Wipe Required

THE CARPET & RUG INSTITUTE

  • Carpet pre-spray and pet stain and odor
From mold and mildew elimination to disinfection of bacteria and viruses on surfaces and fabrics, Vital Oxide can handle a long list of duties in a household and industrial setting. Vital Oxide can also be diluted down for some specific applications.

Full Strength

Vital Oxide comes ready to use (RTU) as a full-strength EPA hospital disinfectant for non-porous surfaces. Full strength is recommended for first-time use on surfaces. Full strength should also be used in environments with high rates of bacteria, mold, and mildew and in high traffic areas and touch points.

 5:1 Carpet and Rug Sanitizer

To Sanitize and Deodorize Carpets and Rugs:

  • Mix 5-parts water to 1-part Vital Oxide.
  • Spray onto surface from a distance of 6-8 inches.
  • Work the product down to the carpet pad (a brush may be used)
  • Allow enough ventilation to air dry.
  • Repeat process as needed.

First test for color fastness in an inconspicuous space. Do not use on wool fabrics.

 

9:1 Food-Contact & Daily Surface Sanitizer

To Sanitize Food-Contact Surfaces:

  • Mix 9-parts water to 1-part Vital Oxide.
  • Spray onto surface from a distance of 6-8 inches, wetting thoroughly.
  • Let stand for 1 minute (or longer if specified by government sanitary code).
  • Allow surface to drain or air dry. Do not rinse or wipe.

To Sanitize Non-Food-Contact, Non-Porous Surfaces:

  • Mix 9-parts water to 1-part Vital Oxide.
  • Spray onto surface from a distance of 6-8 inches, wetting thoroughly.
  • Let stand 5 minutes.
  • Wipe and allow to air dry. No rinse required.

For more instruction on how to use Vital Oxide, refer to the User Guide.

Have a question? Call us at (504) 888-8989

DELIVERY SYSTEMS

ELECTROSTATIC SPRAYERS

electra max 360 electrostatic handheld sprayer feature min

Electra Max 360

Portable Electrostatic Mist Sprayer

Victory Innovations

Electrostatic Backpack Sprayer

NON-ELECTROSTATIC SPRAYERS

boss pro 320 backpack sprayer feature

Boss Pro 320

Cordless Backpack Sprayer

lafferty portable precision fogger feature

Lafferty Precision Fogger

Chemical Atomizer & Sprayer

eagle electric mister feature min

Eagle II Electric Mister

Disinfectant Delivery System