1. STRIP floor thoroughly with heavy duty stripping pad and wax stripper.
2. RINSE floor with clear water; pick up rinse water with mop or wet vacuum and let dry.
3. APPLY floor finish with a clean applicator or clean strand floor mop. Spread floor finish in thin and even coats. The number of coats necessary to achieve desired gloss will be largely dependent upon the condition of the floor.
MAINTENANCE:
1. Damp-mopping with clear water or neutral cleaner will restore the original appearance of the floor.
2. Additional coats may be applied whenever desired. Simply sweep, damp mop with clear water and let dry. Then apply an additional coat of floor finish for continued non-yellowing beauty and protection. (The surface scrubbing and re-coating method may be employed over an extended period of time without stripping the base coat.) Scratch marks may be buffed out with electric polishing machine.
Appearance……………………….. Milky white emulsion
pH………………………………………… 9.2-9.4
Specific Gravity……………………. 1.025 – 1.035
Non-Volatile (solids content)… 25%
Durability……………………………. Excellent
Classification………………………. Buffable
Slip Resistance……………………… Exceeds 0.5 minimum average static coefficient of friction (James Machine)
Urethane Type……………………….. Non-yellowing aliphatic polyurethane
Burnishing Response……………. Excellent
Black-mark Resistance…………. Excellent
Detergent Resistance………….. Excellent
Removability …………………………Good, with John-Henry Brand strippers
Coverage……………………………….. 1500 – 2000 sq. ft/gallon
Drying Time…………………………….. 30-45 minutes (under normal conditions)
Leveling…………………………………. Excellent
Minimum Application Temp………. 50° F
Storage Temperature……………….. 40° F minimum, 100° F maximum
Storage Stability……………………… Excellent, 1 year under normal conditions
Freeze-Thaw Stability……………. Passes three cycles.
Causes irritation to eyes. Prolonged exposure may irritate skin.
