Not all disinfectants and mold removers are created equal. Vital Oxide uses a unique chemical compound called chlorine dioxide. Chlorine dioxide has been used during Anthrax attacks, in the aftermath of Hurricane Katrina, to purify drinking water, and most recently to kill MRSA in schools and hospitals. While other competitors and manufacturers have attempted to copy and produce a form of stabilized chlorine dioxide similar to Vital Oxide, our revolutionary formula is simply unequaled.
Also consider carefully what kinds of chemicals you want around your children, employees, patients, students, friends, and family members. When evaluating and comparing disinfectant products, take a close look at their core ingredients. Most disinfectants and mold removers on the market are extremely toxic and leave behind harmful byproducts and nauseous fumes.
With Vital Oxide, however, you no longer need to use bleach and other harsh chemicals that increase volatile organic compounds (VOCs) in your environment. You can have the peace of mind that you are using a disinfectant that won’t irritate your skin and doesn’t come with any alarming safety warnings and precautions, while still effectively eliminating pathogens and allergens in your home and workspace.
Stable Chlorine Dioxide Formula
Full strength and ready to use
EPA-registered hospital disinfectant with lowest toxicity category—gentle enough for daily disinfecting and sanitizing
NSF-registered “no-rinse on food-contact surfaces” sanitizer (D2)
Certified by CRI (Carpet & Rug Institute) for pet stains and odor
OSHA / WHMIS / GMS compliant
Effective fungicide
Effective mildew and mold remover—kills mold spores and prevents mold regrowth on tile and other materials up to seven months
Excellent for water damage and mold removal services
Heavy-duty odor eliminator—gets rid of bad odors by attacking the source of the problem, not by masking
Eliminates allergens in homes and other environments
Eliminates mold, mildew, and odor in HVAC systems and air ducts
Sanitizes 99.999% of food contact surfaces with no-rinse required
Carpet and rug sanitizer
Soft-surface sanitizer
Hypo-allergenic
pH balance of ~8.5
No volatile organic compounds (VOCs)
No harsh chemicals, non-irritating to skin, no nauseous fumes
No personal protection equipment needed
Effective disinfectant that kills 99.999% of bacteria and viruses, including H1N1; MRSA; Norovirus; HIV; Legionella; Pseudomonas aeruginosa; Hepatitis A, B, and C; Ebola virus; and more
Appearance:Colorless liquid
Odor:Mild–Fresh
Physical State:Liquid
pH:8–9
Boiling Point (°F):212
Solubility in Water:100%
Freezing Point (°F):32
Vapor Pressure(mm Hg):Not Available
Volatile Organic Compounds (VOC):None
Evaporation Rate:Less than Ether
Specific Gravity:1.003@ 68°F (20°C)
Density (lb/gal):8.40@ 68°F (20°C)
ENVIRONMENTAL PROTECTION AGENCY
- Lowest EPA Toxicity Category IV
- No gloves or protective equipment required
- No ocular irritation
- No dermal irritation
- No acute inhalation
NSF INTERNATIONAL
- No rinse required on food-contact surfaces
THE CARPET & RUG INSTITUTE
- Carpet pre-spray and pet stain and odor
From mold and mildew elimination to disinfection of bacteria and viruses on surfaces and fabrics, Vital Oxide can handle a long list of duties in a household and industrial setting. Vital Oxide can also be diluted down for some specific applications.
Full Strength
Vital Oxide comes ready to use (RTU) as a full-strength EPA hospital disinfectant for non-porous surfaces. Full strength is recommended for first-time use on surfaces. Full strength should also be used in environments with high rates of bacteria, mold, and mildew and in high traffic areas and touch points.
5:1 Carpet and Rug Sanitizer
To Sanitize and Deodorize Carpets and Rugs:
- Mix 5-parts water to 1-part Vital Oxide.
- Spray onto surface from a distance of 6-8 inches.
- Work the product down to the carpet pad (a brush may be used)
- Allow enough ventilation to air dry.
- Repeat process as needed.
First test for color fastness in an inconspicuous space. Do not use on wool fabrics.
9:1 Food-Contact & Daily Surface Sanitizer
To Sanitize Food-Contact Surfaces:
- Mix 9-parts water to 1-part Vital Oxide.
- Spray onto surface from a distance of 6-8 inches, wetting thoroughly.
- Let stand for 1 minute (or longer if specified by government sanitary code).
- Allow surface to drain or air dry. Do not rinse or wipe.
To Sanitize Non-Food-Contact, Non-Porous Surfaces:
- Mix 9-parts water to 1-part Vital Oxide.
- Spray onto surface from a distance of 6-8 inches, wetting thoroughly.
- Let stand 5 minutes.
- Wipe and allow to air dry. No rinse required.
For more instruction on how to use Vital Oxide, refer to the User Guide.
Have a question? Call us at (504) 888-8989
DELIVERY SYSTEMS
ELECTROSTATIC SPRAYERS
Electra Max 360
Portable Electrostatic Mist Sprayer
Victory Innovations
Electrostatic Backpack Sprayer
NON-ELECTROSTATIC SPRAYERS
Boss Pro 320
Cordless Backpack Sprayer
Lafferty Precision Fogger
Chemical Atomizer & Sprayer
Eagle II Electric Mister
Disinfectant Delivery System