THERMO SHINE | High Gloss Buffable Floor Finish

THERMO SHINE is an innovative ﬂoor ﬁnish product designed for extreme gloss on frequently maintained  ﬂoors. Specially designed for moderate to heavy trafﬁc areas, the combination of polymer technologies in the  formula provides both an extremely durable ﬁnish resistant to wear, scufﬁng, abrasions and marks as well as an outstandingly versatile product capable of protecting resilient ﬂooring. Surfaces such as sealed marble,  terrazzo, vinyl tile, and more. This product does not require a sealer (except on concrete) and is easy to  apply with most types of available applicators. In addition, the unique chemistry allows for use with low and  high speed spray bufﬁng equipment. For best results burnish over John-Henry REJUVENATOR.  THERMO SHINE is ideal in most any facility including commercial buildings, schools, hospitals, retail  establishments, industrial complexes, and more.

Additional size available: 6 gal pail (JCRE24762)

Have a question? Call us at (504) 888-8989

SKU: JCRE24739 Categories: -Floor Finishes, FLOOR CARE

BASE APPLICATION: Strip ﬂoor per the instructions on the ﬂoor stripper label. Apply thin, light coats until a  base of approximately 4-6 coats has been achieved. Use a clean Rayon® mop or microﬁber applicator and  allow each coat to dry at least 30 minutes between applications, longer if humidity is high. 

MAINTENANCE: Remove all loose debris by sweeping and then dust mopping. Use John-Henry NEUTRAL  CLEAN either by mopping or automatic scrubber to clean the surface. THERMO SHINE will respond well to most any routine. Use of low or high-speed spray buff machinery with John-Henry SPRAY BUFF or  REJUVENATOR will work to bring out the best in this ﬁnish. Do not dry-buff. This extended wear formula will  last the longest between cycles with spray buff or restorer applications. 

TOP SCRUB AND RE-COAT: Remove loose debris by sweeping and then dust mopping. Use John-Henry  NEUTRAL  CLEAN in an automatic scrubber to clean the surface. Rinse thoroughly with clean water and  allow drying. Rebuild base by applying 2-3 thin coats with a Rayon® mop allowing at least 30 minutes to dry  between applications.

Appearance……………….. Milky white emulsion

 pH………………………………. 9.2-9.4 

Speciﬁc Gravity……………. 1.02 – 1.03 

Non-Volatile………………… (solids content) 22%

 Durability…………………….. Excellent 

Classiﬁcation………………… Buffable 

Slip Resistance……………….. Exceeds 0.5 minimum average static  coefﬁcient of friction (James Machine) 

Burnishing Response……… Excellent

 Blackmark……………………….. Resistance Excellent 

Detergent Resistance………. Excellent 

Removability……………………. Good, with John-Henry Brand strippers 

Coverage…………………………. 1500 – 2500 sq. ft/gallon 

Drying Time………………………. 30-45 minutes (under normal conditions)

 Leveling………………………………. Very good 

Minimum Application Temp…. 50° F 

Storage Temperature…………… 40° F minimum, 100° F maximum 

Storage Stability……………………. Excellent, 1 year under normal conditions 

Freeze-Thaw Stability…………….. Passes three cycles.

Irritating to eyes on contact. Prolonged or repeated contact may irritate skin. High concentrations of mist or spray may irritate eyes, nose, and throat.