STRIPPER 99 | Paint, Varnish, and Resin Stripper

Stripper 99 is a “state of the art” paint and finish remover for the next century. It contains no
chlorinated solvents, and is a low VOC product. Superior resin removal for high density 
crosslinked polymer systems, non-crosslinked, such as varnish and lacquer, and even 
polyurethanes. Dissolved resins are easily rinsed with water.

  • Non-Flammable
  • 
Low Evaporation Rate
  • Water Rinsable

Additional sizes available: 6-gallon pail (5307-06P)

 

request quote button

 

Have a question? Call us at (504) 888-8989

 

SKU: 5307-03P Categories: ,

Use Stripper 99 for the effective removal of alkyd polyurethane enamels, nitrocellulose lacquers,
acrylic enamels, straight-chain acrylic floor sealers, and a variety of set-up materials such as MDI
and TDI in the tank washing industries.
Use as-is. Do not dilute with water, as it will diminish Stripper 99’s ability to solvate the
aforementioned materials. Allow to stand for 20-30 minutes. Rinse with water while scrubbing the 
effluent or pressure wash off.

Appearance……………….clear, pale amber

Penetration……………………………excellent

Rinsability……………………………..excellent

Corrosion………………………………………..nil

Stability………………………………..very good

Free acid ………………………………….. none

Free alkali………………………………….. none

Flash point…………………………………145°F

Specific gravity …………………………..0.930

Density ………………………….. 7.75 lbs./gal.

Vapors can cause nausea, dizziness, nausea, stupor, vomiting, headache, and/or irritation to nose, throat, and respiratory system. Causes irritation to eyes. Prolonged exposure may irritate skin.

Have a question? Call us at (504) 888-8989