M-PINGE 200 | Latex Vapor Impingement Presolve

M-PINGE 200 is a next-generation cleaner latex pre-solve that utilizes vapor impingement as a means of preparing for the actual wash. Once treated with the M-PINGE 200, the softened latex can be removed with a simple detergent wash via a spinner. Does not contain chlorinated solvents or petroleum hydrocarbons. When undiluted with water, M-PINGE 200 may be reused indefinitely.

  • Non-Flammable
  • Low Evaporation Rate
  • Water Rinsable

 

Additional sizes available: N/A

 

request quote button

 

Have a question? Call us at (504) 888-8989

 

SKU: JBC24993 Categories: ,

Use TRIPLE PLAY for removal of all types of water treatment polymers, especially where wastewater minimization is desired. Apply 5 gallons TRIPLE PLAY via presolve system, but low volume spinner is even better so as to coat the entire tank uniformly. For multi-compartment tanks simply divide up the amount needed by the number of compartments, although an

additional 20% may be needed for the extra bulkheads. Via rear discharge valve apply steam for 30 minutes. Close valve and remove steam line. Drop spinner into manway and apply 50 gallons hot water (usually around 30 seconds), then drain. Hot water flush again for 30 seconds. Cool tank and inspect.

Appearance …………………. Clear, Amber Liquid

pH ……………………………………………………… N/A

Specific Gravity ………………………. 0.83 Percent

Active ………………………………………………. 100%

Flash Point ………………………………………. 156° F

Dilution………………………… None. Use undiluted

Foam…………………………………………………. None

Hardwater Tolerance …………………………….. N/A

Ammonia…………………………………………… None

Phosphate…………………………………………… None

Storage Stability………………………….. Excellent*

* 1 year under normal

Have a question? Call us at (504) 888-8989