LIQUI-FIRE RX | Latex & Resin Pre-Solve

LIQUI-FIRE RX is a specially formulated solvent stripper for the tank cleaning industry. Recommended to be used non-diluted or thinned out for consistent results and performance. LIQUI-FIRE RX completely strips away resins, leaving no film or residues on the tank surface to hinder tank cleaning when used properly.

 

Additional size available: N/A

 

request quote button

 

Have a question? Call us at (504) 888-8989

 

Use LIQUI-FIRE RX to remove Resins, Latexes, Adhesives, Isocyanates, from Stainless Steel tank wagons, IBC’s, and ISO tanks.

Do not dilute with any other solvents. Use as is. For best results apply with a Pre-solve system from dome lids and cleanout or vent caps, without entering the tank. Recirculate with a pump system. For best results, seal up tank and allow to stand for 30 minutes after application

Keep container closed when not in use. Disposal of spent product should be in accordance with all state and federal regulations.

Appearance…………. Clear, Colorless Liquid

pH………………………… N/A

Specific Gravity…….. 0.96

Percent Active………. 100%

Flash Point…………….. 132° F

Dilution………………….. None-Must be used undiluted

Foam………………………. N/A

Hardwater Tolerance.. N/A

Chlorinated Solvents.. None

Ammonia………………… None

Phosphate……………….. None

Storage Stability………. Indefinite

NOTE: MARITIME SHIPMENTS REQUIRE THIS PRODUCT TO SHIP AS:

Petroleum Products, n.o.s., 3, UN1268, III (Liqui-Fire RX)

Vapors can cause nausea, dizziness, nausea, stupor, vomiting, headache, and/or irritation to nose, throat, and respiratory system. Irritating to eyes and skin. Causes irritation to eyes. Prolonged exposure may irritate skin.

Have a question? Call us at (504) 888-8989