LIQUI-FIRE LST | Paint, Varnish, and Resin Stripper

LIQUI-FIRE LST “Low Surface Tension” paint and finish remover contains no chlorinated solvents but is a highly effective stripper for varnish, lacquers, polyurethanes, enamels, acrylics, a wide
 variety of set-up resins, and the like. LIQUID-FIRE LST is used as a dip or spray and can be
warmed for improved performance.

  • Non-Flammable
  • 
Low Evaporation Rate
  • Water Rinsable

Additional sizes available: 5-gallon pail (JBC8246)

 

request quote button

 

Have a question? Call us at (504) 888-8989

 

Use LIQUI- FIRE LST to clean tanks and containers, strip paints and coatings from parts, and
 wherever a highly effective paint and coating stripper is needed.

Use as-is. Do not dilute with water, as it will diminish LIQUI-FIRE LST’s ability to solvate the 
aforementioned materials. Heating is optional, but not necessary. Pre-solving set-up materials by 
fogging is recommended, but perform in non-enclosed areas. The product may be collected for reuse.
 Caution: Mist application of this and similar materials may result in the formation of flammable or 
explosible vapors or aerosols. Replacing the air with nitrogen or CO2 will mitigate this hazard.

Appearance Colorless, Clear liquid


Odor………………………………. Mild, characteristic ether-like odor


Specific Gravity……………….. 0.98 – 1.00


pH…………………………………… N/A


Flammability…………………….. Greater than 200 deg F (closed cup)


Methylene chloride…………. None


Evaporation rate……………. Very low – Slower than water


VOC’s…………………………….. Very low ~ 8.00 %


Solubility in water…………… Complete


Dilution…………………………… Use as-is


Biodegradable…………………. N/A


Storage Stability……………….. Excellent, 1 year minimum

Skin and eye irritant. Mists and vapors may be irritating to eyes, nose, throat, and respiratory system.

Have a question? Call us at (504) 888-8989