Use Fast-Break to clean trucks, buses, wheels, heavy equipment, oil field equipment, aircraft, trains, especially where wastewater recycling is required.
For light road film, apply Fast Break at a 25 to 1 dilution ratio. For heavy road film (seldom washed vehicles), apply at 10 to 1. For oil soils, apply at 4 to 1. Using a downstream injector or under full pressure from a pressure washer, apply Fast Break from bottom to top, and allow to stand for at least 30 seconds before rinsing. Rinse first from bottom to top, and then from top to bottom. Hot water is desirable but not required. Wash areas small enough so as not to allow the product to dry before rinsing.
Appearance…………………… Clear, yellow liquid
pH………………………………… 13 ± .5
Specific Gravity………………. 1.03
Percent Active……………….. 100%
Flash Point…………………….. None
Dilution………………………… Up to 40:1 with water
Foam………………………….. Low-Moderate
Hardwater Tolerance…. Excellent
Ammonia…………………… None
Butyl………………………….. None
Phosphate………………….. None
Storage Stability………… Excellent, indefinite
USDA Registered?………… No
Causes severe irritation and possibly burns to eyes. Causes moderate to severe irritation and possibly burns to skin. Mists and spray can irritate eyes, nose, throat, and respiratory system.