Use LIQUI- FIRE LST to clean tanks and containers, strip paints and coatings from parts, and wherever a highly effective paint and coating stripper is needed.
Use as-is. Do not dilute with water, as it will diminish LIQUI-FIRE LST’s ability to solvate the aforementioned materials. Heating is optional, but not necessary. Pre-solving set-up materials by fogging is recommended, but perform in non-enclosed areas. The product may be collected for reuse. Caution: Mist application of this and similar materials may result in the formation of flammable or explosible vapors or aerosols. Replacing the air with nitrogen or CO2 will mitigate this hazard.
Appearance Colorless, Clear liquid
Odor………………………………. Mild, characteristic ether-like odor
Specific Gravity……………….. 0.98 – 1.00
pH…………………………………… N/A
Flammability…………………….. Greater than 200 deg F (closed cup)
Methylene chloride…………. None
Evaporation rate……………. Very low – Slower than water
VOC’s…………………………….. Very low ~ 8.00 %
Solubility in water…………… Complete
Dilution…………………………… Use as-is
Biodegradable…………………. N/A
Storage Stability……………….. Excellent, 1 year minimum
Skin and eye irritant. Mists and vapors may be irritating to eyes, nose, throat, and respiratory system.
